updated backend

pfosten/vendor/webmozart/assert/.composer-auth.json

@@ -1,7 +0,0 @@
-{
-    "github-oauth": {
-        "github.com": "PLEASE DO NOT USE THIS TOKEN IN YOUR OWN PROJECTS/FORKS",
-        "github.com": "This token is reserved for testing the webmozart/* repositories",
-        "github.com": "a9debbffdd953ee9b3b82dbc3b807cde2086bb86"
-    }
-}

pfosten/vendor/webmozart/assert/.styleci.yml

@@ -1,11 +0,0 @@
-preset: symfony
-
-finder:
-    exclude:
-        - "tests"
-
-enabled:
-    - ordered_use
-
-disabled:
-    - phpdoc_annotation_without_dot # This is still buggy: https://github.com/symfony/symfony/pull/19198

pfosten/vendor/webmozart/assert/CHANGELOG.md

@@ -3,8 +3,82 @@ Changelog
 
 ## UNRELEASED
 
+## 1.6.0 (2019-11-24)
+
+### Added
+
+* added `Assert::validArrayKey()`
+* added `Assert::isNonEmptyList()`
+* added `Assert::isNonEmptyMap()`
+* added `@throws InvalidArgumentException` annotations to all methods that throw.
+* added `@psalm-assert` for the list type to the `isList` assertion.
+
+### Fixed
+
+* `ResourceBundle` & `SimpleXMLElement` now pass the `isCountable` assertions. 
+They are countable, without implementing the `Countable` interface.
+* The doc block of `range` now has the proper variables.
+* An empty array will now pass `isList` and `isMap`. As it is a valid form of both.
+If a non empty variant is needed, use `isNonEmptyList` or `isNonEmptyMap`.
+
+### Changed
+
+* Removed some `@psalm-assert` annotations, that were 'side effect' assertions See:
+  * [#144](https://github.com/webmozart/assert/pull/144)
+  * [#145](https://github.com/webmozart/assert/issues/145)
+  * [#146](https://github.com/webmozart/assert/pull/146)
+  * [#150](https://github.com/webmozart/assert/pull/150)
+* If you use psalm, the minimum version needed is `3.6.0`. Which is enforced through a composer conflict. 
+If you don't use psalm, then this has no impact.
+
+## 1.5.0 (2019-08-24)
+
 ### Added 
 
+* added `Assert::uniqueValues()`
+* added `Assert::unicodeLetters()`
+* added: `Assert::email()`
+* added support for [Psalm](https://github.com/vimeo/psalm), by adding `@psalm-assert` annotations where appropriate.
+
+### Fixed
+
+* `Assert::endsWith()` would not give the correct result when dealing with multibyte suffix.
+* `Assert::length(), minLength, maxLength, lengthBetween` would not give the correct result when dealing with multibyte characters.
+
+**NOTE**: These 2 changes may break your assertions if you relied on the fact that multibyte characters didn't behave correctly.
+
+### Changed
+
+* The names of some variables have been updated to better reflect what they are.
+* All function calls are now in their FQN form, slightly increasing performance.
+* Tests are now properly ran against HHVM-3.30 and PHP nightly.
+
+### Deprecation
+
+* deprecated `Assert::isTraversable()` in favor of `Assert::isIterable()`
+  * This was already done in 1.3.0, but it was only done through a silenced `trigger_error`. It is now annotated as well.
+
+## 1.4.0 (2018-12-25)
+
+### Added
+
+* added `Assert::ip()`
+* added `Assert::ipv4()`
+* added `Assert::ipv6()`
+* added `Assert::notRegex()`
+* added `Assert::interfaceExists()`
+* added `Assert::isList()`
+* added `Assert::isMap()`
+* added polyfill for ctype
+
+### Fixed
+
+* Special case when comparing objects implementing `__toString()`
+
+## 1.3.0 (2018-01-29)
+
+### Added
+
 * added `Assert::minCount()`
 * added `Assert::maxCount()`
 * added `Assert::countBetween()`
@@ -20,6 +94,10 @@ Changelog
 
 * `stringNotEmpty` will no longer report "0" is an empty string
 
+### Deprecation
+
+* deprecated `Assert::isTraversable()` in favor of `Assert::isIterable()`
+
 ## 1.2.0 (2016-11-23)
 
  * added `Assert::throws()`

pfosten/vendor/webmozart/assert/README.md

@@ -3,19 +3,15 @@ Webmozart Assert
 
 [![Build Status](https://travis-ci.org/webmozart/assert.svg?branch=master)](https://travis-ci.org/webmozart/assert)
 [![Build status](https://ci.appveyor.com/api/projects/status/lyg83bcsisrr94se/branch/master?svg=true)](https://ci.appveyor.com/project/webmozart/assert/branch/master)
+[![Code Coverage](https://scrutinizer-ci.com/g/webmozart/assert/badges/coverage.png?b=master)](https://scrutinizer-ci.com/g/webmozart/assert/?branch=master)
 [![Latest Stable Version](https://poser.pugx.org/webmozart/assert/v/stable.svg)](https://packagist.org/packages/webmozart/assert)
 [![Total Downloads](https://poser.pugx.org/webmozart/assert/downloads.svg)](https://packagist.org/packages/webmozart/assert)
-[![Dependency Status](https://www.versioneye.com/php/webmozart:assert/1.2.0/badge.svg)](https://www.versioneye.com/php/webmozart:assert/1.2.0)
-
-Latest release: [1.2.0](https://packagist.org/packages/webmozart/assert#1.2.0)
-
-PHP >= 5.3.9
 
 This library contains efficient assertions to test the input and output of
 your methods. With these assertions, you can greatly reduce the amount of coding
 needed to write a safe implementation.
 
-All assertions in the [`Assert`] class throw an `\InvalidArgumentException` if 
+All assertions in the [`Assert`] class throw an `\InvalidArgumentException` if
 they fail.
 
 FAQ
@@ -27,21 +23,21 @@ This library is heavily inspired by Benjamin Eberlei's wonderful [assert package
 but fixes a usability issue with error messages that can't be fixed there without
 breaking backwards compatibility.
 
-This package features usable error messages by default. However, you can also 
+This package features usable error messages by default. However, you can also
 easily write custom error messages:
 
 ```
 Assert::string($path, 'The path is expected to be a string. Got: %s');
 ```
 
-In [beberlei/assert], the ordering of the `%s` placeholders is different for 
-every assertion. This package, on the contrary, provides consistent placeholder 
+In [beberlei/assert], the ordering of the `%s` placeholders is different for
+every assertion. This package, on the contrary, provides consistent placeholder
 ordering for all assertions:
 
 * `%s`: The tested value as string, e.g. `"/foo/bar"`.
 * `%2$s`, `%3$s`, ...: Additional assertion-specific values, e.g. the
   minimum/maximum length, allowed values, etc.
-  
+
 Check the source code of the assertions to find out details about the additional
 available placeholders.
 
@@ -74,11 +70,11 @@ If you create an employee with an invalid ID, an exception is thrown:
 
 ```php
 new Employee('foobar');
-// => InvalidArgumentException: 
+// => InvalidArgumentException:
 //    The employee ID must be an integer. Got: string
 
 new Employee(-10);
-// => InvalidArgumentException: 
+// => InvalidArgumentException:
 //    The employee ID must be a positive integer. Got: -10
 ```
 
@@ -111,6 +107,7 @@ Method                                                   | Description
 `isInstanceOfAny($value, array $classes, $message = '')` | Check that a value is an `instanceof` a at least one class on the array of classes
 `notInstanceOf($value, $class, $message = '')`           | Check that a value is not an `instanceof` a class
 `isArrayAccessible($value, $message = '')`               | Check that a value can be accessed as an array
+`uniqueValues($values, $message = '')`                   | Check that the given array contains unique values
 
 ### Comparison Assertions
 
@@ -146,6 +143,8 @@ Method                                              | Description
 `startsWithLetter($value, $message = '')`           | Check that a string starts with a letter
 `endsWith($value, $suffix, $message = '')`          | Check that a string has a suffix
 `regex($value, $pattern, $message = '')`            | Check that a string matches a regular expression
+`notRegex($value, $pattern, $message = '')`         | Check that a string does not match a regular expression
+`unicodeLetters($value, $message = '')`             | Check that a string contains Unicode letters only
 `alpha($value, $message = '')`                      | Check that a string contains letters only
 `digits($value, $message = '')`                     | Check that a string contains digits only
 `alnum($value, $message = '')`                      | Check that a string contains letters and digits only
@@ -156,6 +155,10 @@ Method                                              | Description
 `maxLength($value, $max, $message = '')`            | Check that a string has at most a certain number of characters
 `lengthBetween($value, $min, $max, $message = '')`  | Check that a string has a length in the given range
 `uuid($value, $message = '')`                       | Check that a string is a valid UUID
+`ip($value, $message = '')`                         | Check that a string is a valid IP (either IPv4 or IPv6)
+`ipv4($value, $message = '')`                       | Check that a string is a valid IPv4
+`ipv6($value, $message = '')`                       | Check that a string is a valid IPv6
+`email($value, $message = '')`                      | Check that a string is a valid e-mail address
 `notWhitespaceOnly($value, $message = '')`          | Check that a string contains at least one non-whitespace character
 
 ### File Assertions
@@ -174,6 +177,7 @@ Method                                                | Description
 ----------------------------------------------------- | --------------------------------------------------
 `classExists($value, $message = '')`                  | Check that a value is an existing class name
 `subclassOf($value, $class, $message = '')`           | Check that a class is a subclass of another
+`interfaceExists($value, $message = '')`              | Check that a value is an existing interface name
 `implementsInterface($value, $class, $message = '')`  | Check that a class implements an interface
 `propertyExists($value, $property, $message = '')`    | Check that a property exists in a class/object
 `propertyNotExists($value, $property, $message = '')` | Check that a property does not exist in a class/object
@@ -186,10 +190,15 @@ Method                                             | Description
 -------------------------------------------------- | ------------------------------------------------------------------
 `keyExists($array, $key, $message = '')`           | Check that a key exists in an array
 `keyNotExists($array, $key, $message = '')`        | Check that a key does not exist in an array
+`validArrayKey($key, $message = '')`               | Check that a value is a valid array key (int or string)
 `count($array, $number, $message = '')`            | Check that an array contains a specific number of elements
 `minCount($array, $min, $message = '')`            | Check that an array contains at least a certain number of elements
 `maxCount($array, $max, $message = '')`            | Check that an array contains at most a certain number of elements
 `countBetween($array, $min, $max, $message = '')`  | Check that an array has a count in the given range
+`isList($array, $message = '')`                    | Check that an array is a non-associative list
+`isNonEmptyList($array, $message = '')`            | Check that an array is a non-associative list, and not empty
+`isMap($array, $message = '')`                     | Check that an array is associative and has strings as keys
+`isNonEmptyMap($array, $message = '')`             | Check that an array is associative and has strings as keys, and is not empty
 
 ### Function Assertions
 
@@ -215,6 +224,27 @@ assertion only if it the value is not `null`:
 Assert::nullOrString($middleName, 'The middle name must be a string or null. Got: %s');
 ```
 
+### Extending Assert
+
+The `Assert` class comes with a few methods, which can be overridden to change the class behaviour. You can also extend it to
+add your own assertions.
+
+#### Overriding methods
+
+Overriding the following methods in your assertion class allows you to change the behaviour of the assertions:
+
+* `public static function __callStatic($name, $arguments)`
+  * This method is used to 'create' the `nullOr` and `all` versions of the assertions.
+* `protected static function valueToString($value)`
+  * This method is used for error messages, to convert the value to a string value for displaying. You could use this for representing a value object with a `__toString` method for example.
+* `protected static function typeToString($value)`
+  * This method is used for error messages, to convert the a value to a string representing its type.
+* `protected static function strlen($value)`
+  * This method is used to calculate string lenght for relevant methods, using the `mb_strlen` if available and usefull.
+* `protected static function reportInvalidArgument($message)`
+  * This method is called when an assertion fails, with the specified error message. Here you can throw your own exception, or log something.
+
+
 Authors
 -------
 
@@ -229,12 +259,6 @@ Contributions to the package are always welcome!
 * Report any bugs or issues you find on the [issue tracker].
 * You can grab the source code at the package's [Git repository].
 
-Support
--------
-
-If you are having problems, send a mail to bschussek@gmail.com or shout out to
-[@webmozart] on Twitter.
-
 License
 -------
 

pfosten/vendor/webmozart/assert/composer.json

@@ -1,7 +1,11 @@
 {
     "name": "webmozart/assert",
     "description": "Assertions to validate method input/output with nice error messages.",
-    "keywords": ["assert", "check", "validate"],
+    "keywords": [
+        "assert",
+        "check",
+        "validate"
+    ],
     "license": "MIT",
     "authors": [
         {
@@ -10,11 +14,14 @@
         }
     ],
     "require": {
-        "php": "^5.3.3 || ^7.0"
+        "php": "^5.3.3 || ^7.0",
+        "symfony/polyfill-ctype": "^1.8"
     },
     "require-dev": {
-        "phpunit/phpunit": "^4.6",
-        "sebastian/version": "^1.0.1"
+        "phpunit/phpunit": "^4.8.36 || ^7.5.13"
+    },
+    "conflict": {
+        "vimeo/psalm": "<3.6.0"
     },
     "autoload": {
         "psr-4": {
@@ -25,10 +32,5 @@
         "psr-4": {
             "Webmozart\\Assert\\Tests\\": "tests/"
         }
-    },
-    "extra": {
-        "branch-alias": {
-            "dev-master": "1.3-dev"
-        }
     }
 }